Startup energy efficiency and safety
The start up of a TCC is very time efficient. When you switch on a motor or engine of 700 kW it soon becomes rather hot inside the a closed space approximately 1 metre long and with a diametre of slightly more than 1 metre, containing billions of constantly colliding particles. The process loses a minimum energy to the surroundings because there are no large heated surfaces. It is an intrinsically safe method because there are no oxygen sources worth mentioning. It is efficiently protected by insulation and simple routines.
The TCC®
- Recovery of oil from drill cuttings
- Quality of base oil recovered in the friction based hammermill
- Animation of the TCC® process
- How does a TCC® work
- The principles of thermal treatment
- Indirect heaters
- Footprint and mobility
- Startup, energy efficiency and safety
- Offshore capabilities
- The output light fractions
- The output mineral solids
- A turn key solution
- Scope of supply
- Capacity of a TCC®
| Thermtech AS | Jacob Kjødes vei 15 NO-5232-Paradis Bergen, Norway | Phone: +47 55 60 40 60 | Fax: +47 55 60 40 61 | |
| Disclaimer |